beautypg.com

Jetway Computer NF94 User Manual

Page 34

background image





29

SPP/ ECP +EPP 1.7/ EPP 1.9

To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To operate
the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By choosing “ECP”,
the onboard parallel port will operate in ECP mode only. Choosing “ECP+EPP” will allow the
onboard parallel port to support both the ECP and EPP modes simultaneously. The ECP mode

has to use the DMA channel, so choose the onboard parallel port with the ECP feature. After
selecting it, the following message will appear: “ECP Mode Use DMA” at this time, the user can
choose between DMA channels 3 to 1. The onboard parallel port is EPP Spec. compliant, so

after the user chooses the onboard parallel port with the EPP function, the following message will
be displayed on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec. or EPP 1.9
spec. can be chosen.

Watchdog Timer Select

This item is used to activate the watchdog function. The optional settings are: Enabled; Disabled.

When set it as Enabled user can choose configuration figures in sub-items.

Watchdog Timer Value

This item is only activated when Watchdog Timer Select is set as Enabled and users can set a

value from the range of 0~255

Watchdog Timer Unit

This item is only activated when Watchdog Timer Select is set as Enabled and the optional units

are: Sec. and Min.

*Note: User needs an additional Watchdog Programming Reference Code to make use

of this BIOS function. Detailed procedures please download from our website if
necessary.