Jetway Computer NF9B - Manual (Page 36)

31
Legacy OpROM Support:
Launch External PxE OpROM/Launch LAN1 PXE OpROM//Launch LAN1 PXE
OpROM
Use this item to enable or disable boot option for legacy network devices.
Launch Storage OpROM
Use this item to enable or disable boot option for legacy mass storage devices with
option ROM.
Onboard LAN 1 Controller
Use this item to enable or disable PCI Express root port 1.
Onboard LAN 2 Controller
Use this item to enable or disable PCI Express root port
SATA 3.0 Controller
Use this item to enable or disable SATA 3.0 controller.
Configure SATA 3.0 as
Use this item to select an operative mode for SATA 3.0 controller. The optional
settings are: [IDE Mode]; [AHCI Mode].
ERP Function
Use this item to enable or disable ERP function for this board. This item should be set
as [Disabled] if you wish to have active all wakeup function.
► PCI Subsystem Settings
Press [Enter] to enter and make settings for the following sub-items:
PCI ROM Priority
In the case of multiple option ROMs(Legacy and EFI compatible), specifies what
PCI option ROM to launch. The optional settings: [Legacy ROM]; [EFI Compatible
ROM].