Jetway Computer NF9T User Manual

Page 49

USB 3.0 Link Power Management
The optional settings are: [Enabled]; [Disabled].
* Note: This item only show up when ‘USB 3.0 Support’ set as [Enabled], [Auto] or
[Smart Auto].
USB 2.0 Support
The optional settings are: [Auto]; [Disabled].
* Note:When set as [Auto], user can make further settings in the following
sub-items:
USB RMH Mode
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable PCH USB Rate Matching Hubs mode.
USB EHCI Debug
The optional settings are: [Enabled]; [Disabled].
Use this item to enable or disable PCH EHCI debug capability.
PCI-E Slot Speed
The optional settings are: [Auto]; [Gen2]; [Gen1].
Onboard Lan1 Controller
The optional settings are: [Enabled]; [Disabled].
Mini PCIE
The optional settings are: [Enabled]; [Disabled].

Speed

The optional settings are: [Auto]; [Gen2]; [Gen1].

Restore AC Power Loss
Use this item to select AC power state when power is re-applied after a power
failure. The optional settings are: [Power Off]; [Power On]; [Last State].