Jetway Computer NF9T - Manual (Page 40)

35
CPUFAN / SYSFAN1/2 Idle-Speed Temperature
Use this item to set CPUFAN/SYSFAN1/2 idle speed temperature. Fan will run at
idle speed when below this temperature.
CPUFAN / SYSFAN1/2 Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN1/2 idle speed duty.. Fan will run at idle
speed when below the pre-set duty.
 PC Health Status
Press [Enter] to view current hardware health status.
 Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [70
o
C/158
o
F]; [75
o
C/167
o
F]; [80
o
C/176
o
F];
[85
o
C/185
o
F].
 Serial Port Consol Redirection
Press [Enter] to make settings for serial port redirection settings:
COM1
Console Redirection
The optional settings are: [Disabled]; [Enabled].
When set as [Enabled], user can make further settings in:
 Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items.
Terminal Type
The optional settings are: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
Bits per second
The optional settings are: [9600]; [19200]; [38400]; [57600]; [115200].
Data Bits
The optional settings are: [7]; [8].
Parity