Jetway Computer NF9U - Manual (Page 48)

43
Single]; [1366 x 768 24bit Single]; [1440 x 900 18bit Dual]; [1440 x 900 24bit Dual];
[1280 x 800 18bit Single]; [1280 x 800 24bit Single]; [1680 x 1050 24bit Dual];
[1920 x 1080 24bit Dual].
 South Bridge
Press [Enter] to set south bridge parameters.
 USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
USB 3.0 Support
The optional settings are: [Enabled]; [Disabled]; [Auto]; [Smart Auto].
* Note: When set as [Disable], USB 2.0 Support is applicable, for user to make
further settings.
USB 3.0 Link Power Management
The optional settings are: [Enabled]; [Disabled].
* Note: This item only show up when ‘USB 3.0 Support’ set as [Enabled], [Auto] or
[Smart Auto].
USB 2.0 Support
The optional settings are: [Auto]; [Disabled].
Audio Controller
The optional settings are: [Disabled]; [Enabled]
Azalia HDMI Codec
Use this item to enable or disable internal HDMI codec for Azalia.
The optional settings are: [Disabled]; [Enabled].
PCI-E Slot Speed
The optional settings are: [Auto]; [Gen2]; [Gen1].
MPE Controller
The optional settings are: [Enabled];[Disabled];
Speed
The optional settings are: [Auto]; [Gen2]; [Gen1].