Jetway Computer NF9HG User Manual

Page 37

The optional settings are: [128MB]; [256MB]; [512MB].
GTT Size
The optional settings are: [1MB]; [2MB].
IGD Turbo Enable
The optional settings are: [Enabled]; [Disabled].
Spread Spectrum Clock
The optional settings are: [Enabled]; [Disabled].

 South Bridge

Press [Enter] to make settings for the following sub-items:
 USB Configuration
Press [Enter] to make settings for the following sub-items:
USB Configuration
USB 3.0 Support
The optional settings are: [Auto]; [Enabled]; [Disabled]; [Auto]; [Smart Auto].
USB 3.0 Link Power Management
The optional settings are: [Enabled]; [Disabled].
USB 2.0 Support
The optional settings are: [Auto]; [Disabled].
*‘USB 2.0 Support’ is only available for further settings when ‘USB 3.0 Support’
is set as [Disabled] .
*LAN3&4 Bypass State @ Power On
The optional settings are: [Bypass]; [Passthrough].
*LAN3&4 Bypass State @ Power Off
The optional settings are: [Bypass]; [Passthrough].
*LAN3&4 Bypass WDT Function
The optional settings are: [Enabled]; [Disabled].

*Note: The above three setting items: ‘LAN3&4 Bypass State @ Power On’,
‘LAN3&4 Bypass State @ Power Off’ and ‘LAN3&4 Bypass WDT Function’ are
only optional for NF9HB series. NF9HG series do not support these functions so
there are no such items in BIOS settings.

PCIE1 Slot
The optional settings are: [Enabled]; [Disabled].
MPE Controller
The optional settings are: [Enabled]; [Disabled].