Jetway Computer NF9J User Manual

Page 42

The optional settings are: [32M]; [64M]; [128M]; [256M]; [512M]; [1024M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
LCD Control
Active LFP
The optional settings are: [Disabled]; [Enabled].

[Disable]: VBIOS does not enable LVDS.
[Enable]: VBIOS enable LVDS driver by integrated encoder.
LVDS Panel Type
Use this item to select LVDS panel resolution.
The optional setting are: [640 x 480 18bit Single]; [800 x 480 18bit Single]; [800x
600 18bit Single]; [1024 x 600 18bit Single]; [1024 x 768 24bit Single]; [1280 x 720
18bit Single]; [1280 x 1024 24bit Dual]; [1366 x 768 18bit Single]; [1366 x 768
24bit Single]; [1440 x 900 18bit Dual]; [1400 x 900 24bit Dual]; [1400 x 1050 24bit
Dual]; [1600 x 900 24bit Dual]; [1680 x 1050 24bit Dual]; [1600 x 1200 24bit Dual];
[1920 x 1080 24bit Dual].

► PEG Configuration

Press [Enter] to make settings for the following sub-items:
PEG Slot Configuration

PEG-Gen X
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
Enable PEG
The optional settings are: [Disabled]; [Enabled]; [Auto].
Detect Non-Compliance Device
Use this item to detect non-compliance PCI Express device in PEG.
The optional settings are: [Disabled]; [Enabled].
Program PCIe ASPM after OpROM
The optional settings are: [Enabled]; [Disabled].
[Enabled]: PCIe ASPM will be programmed after OpROM.
[Disabled]: PCIe ASPM will be programmed before OpROM.
PEG De-emphasis Control
Use this item to configure the De-emphasis control on PEG.