Jetway Computer NF9J - Manual (Page 41)

36
failure. The optional settings are: [Power Off]; [Power On]; [Last State].
► System Agent (SA) Configuration
Press [Enter] to make settings for the following sub-items:
VT-D
The optional settings are: [Enabled]; [Disabled].
*This item might not be available depending on configuration.
Azalia Internal HDMI Codec
Use this item to enable or disable DP/HDMI/DVI port audio device.
The optional settings are: [Enabled]; [Disabled].
► Graphics Configuration
Press [Enter] to make further settings for Graphics Configuration.
Graphics Configuration
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. 'Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on primary
display.
The optional settings are: [VBIOS Default]; [CRT]; [HDMI]; [DVI]; [LVDS].
*When set as [CRT]; [HDMI]; [DVI] or [LVDS], the following sub-item shall
appear:
Secondary IGFX Boot Display
The optional settings are: [Disabled]; [CRT]; [HDMI]; [DVI]; [LVDS].
Primary Display
Use this item to select which of IGFX/PEG/PCI graphics device should be primary
display or select SG for switchable GFX.
The optional settings are: [Auto]; [IGFX]; [PEG].
Internal Graphics
The optional settings are: [Auto]; [Disabled]; [Enabled].
Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.