Maintenance, Wchanging the lamp – Dukane 28A7250 User Manual

Page 21

Text mode
Original mode

English

Maintenance

Changing the Lamp

The projection display will detect the lamp life itself. It will show you a warning
message when the lamp is used over working hours. When you see this message,
change the lamp as soon as possible.

Make sure the projection display has cooled for at least 30 minutes before
change the lamp.

Warning: Lamp compartment is hot! Allow it to cool before changing
lamps!

* We suggest you a Professional Engineer to change the projection lamp

module.

Lamp Changing Directions:

1. Use a cross screwdriver to remove the screw of the lamp latch.

Open the lamp door.

2. Remove the screws on the metal protection cover and then open this metal cover.

Lamp Latch Screw

Metal Cover

Screws

Lamp Door

Lamp Metal Cover