Insinger Master RC - Manual (Page 2)

Thank you for purchasing this quality
Insinger product.
On the space provided below please record the
model, serial number and start-up date of this unit:
Model:__________________________________
Serial Number:___________________________
Start-Up Date:____________________________
When referring to this equipment please have this
information available.
Each piece of equipment at Insinger is carefully
tested before shipment for proper operation. If the
need for service should arise please contact your
local Authorized Insinger Service Company.
A Service Network Listing is provided on our web
site, www.insingermachine.com or call Insinger at
800-344-4802 for your local authorized servicer.
For proper activation of the Insinger Limited
Warranty a SureFire™ Start-Up & Check-Out
Service should be completed on your machine.
Refer to the Introduction section in this manual for
an explanation of Insinger SureFire™ Start-Up &
Check-Out Program.
Please read the Insinger Limited Warantyt and all
installation and operation instructions carefully
before attempting to install or operate your new
Insinger product.
To register your machine for warranty by phone, fax
or the internet or for answers to question
concerning installation, operation, or service contact
our Technical Services Department:
Toll-Free 800-344-4802
Fax 215-624-6966
E-mail [email protected]
Web www.insingermachine.com
TECHNICAL SERVICE CONTACTS
Clipper/Master RC DOC FLT-CLPMST 1.0 04 www.insingermachine.com 800-344-4802
TABLE OF CONTENTS
Part 1
Technical Information
•
Introduction
•
Cut-sheets & Installation Drawings
•
Warranties
3-13
Part 2
Installation Instructions
•
Installation and Start-Up Procedures
14-15
Part 3
Operating & Cleaning Instructions
•
Operating Procedures
•
Cleaning Procedures
16-17
Part 4
Maintenance & Repair Procedures
•
Maintenance & Repair Procedures
•
Basic Service Guide
18-20
Part 5
Electrical Schematics & Replacement Parts
•
Machine Wiring Diagrams
•
Control Panel Layout & Component Drawings
21-31
Part 6
Spare Parts List
•
Recommended Spare Parts List
32
Part 7
Replacement Parts
•
Overall Assembly Drawings for:
Clipper RC
Master RC
•
Conveyor Overload Assembly
•
Pump Assemblies
•
Fill & Final Rinse Piping Assemblies
•
Photo-eye Assembly
•
Level Float & Detergent Probe Locations
•
Curtain Locations
•
Electrical Heaters
•
Steam Heating
•
Lighting Parts
•
Conveyor Assemblies
33-73