Dukane ImagePro 8915 - Manual (Page 52)

40
Multifunctional settings
NETWORK Menu
Item Description
DHCP
Using the buttons ▲/▼ turns on/off the DHCP function.
TURN ON  TURN OFF
If your network doesn’t support the DHCP function, select the TURN
OFF.
IP ADDRESS
Enter the IP address of the projector using
the ◄/►/▲/▼ buttons.
This menu is available only when the item of
the DHCP is set to TURN OFF.
SUBNET MASK
Enter the SUBNET MASK of your
NETWORK using the ◄/►/▲/▼ buttons.
This menu is available only when the item of
the DHCP is set to TURN OFF.
DEFAULT
GATEWAY
Enter the DEFAULT GATEWAY. This is the
address of the device as gateway to an
outer network.
This menu is available only when the item of
the DHCP is set to TURN OFF.
INFORMATION
Selecting this item shows the information about the current network
setting of the projector.
With the NETWORK menu, items shown in the table below
can be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button on
the remote control to progress. Then perform it referring to
the following table.
Make your Network settings by manual operation as following the
dialog box.
MENU [RGB]
IMAGE
SETUP
PICTURE
INPUT
OPTION
SCREEN
:SELECT
VIDEO Qlty.
EASY MENU
IP ADDRESS
SUBNET MASK
INFORMATION
DHCP TURN OFF
DEFAULT GATEWAY
NETWORK
192. 168. 24
IP ADDRESS
1.
255. 255. 1
SUBNET MASK
255.
255. 255. 0
DEFAULT GATEWAY
255.