Carpet spikes, Speaker wire – Induction Dynamics S1.8ST User Manual
Page 5
4
Audio Perfection Realized
™
Carpet Spikes
Carpet spikes are not required with the S1T. However, they have been provided if you
would prefer to use them. Should you choose to do so, lay the S1T on its back side, then
screw the carpet spikes into the threaded holes under the base of each speaker.
Speaker Wire
Use approved wire designed for in-wall or exposed use, as appropriate for your installation.
For the S1T, we recommend using high-quality speaker wire that is 12 gauge or lower,
with easily visible polarity coding to make your connections. The following chart identifies
minimum gauge requirements for various lengths. See your local dealer or installation
contractor for more information.