Dynex DX-P7DVD - Manual (Page 8)

8
Remote control
# Button Description
1 SETUP Press to open or close the Setup menu.
2 DISPLAY Press to display information about the disc, such as title, chapter number,
track number, and time.
3 (previous) Press to go to the previous title, chapter, or track.
4 (up) Press to navigate up in a menu.
5 (reverse)
/ (left)
Press to scan backward on the disc. Each time you press this button, the
fast-reverse speed increases from 2, to 4, to 8, to 16, to 32 times the normal
speed. In menu mode, press to navigate left on a menu.
6 ENTER Press to execute or confirm a selection.
7 (play/pause) Press to start playback. When a disc is playing, press to pause playback. Press
again to resume playback.
Note: The first time you use the remote control you must remove the film
between the battery and the compartment cover to activate the remote control.
DX-P7DVD-P9DVD_09-1108_MAN_ENG.fm Page 8 Thursday, January 14, 2010 8:57 AM