ikan IKW1-A - Manual (Page 14)

14
V. FIRMWARE UPDATE
To flash firmware updates, use the following procedure:
FIGURE 11
*NOTE: Use Primary USB port on top (FIGURE 11), not on side (Secondary)
Transmitter Firmware
1) Download the software on a USB flash drive. The file name will be similar to
cavm_netHD.bin.
2) Turn off device.
3) Plug USB Flash drive with downloaded firmware into transmitter using a
Female USB to USB Mini Male Adapter.
4) Turn the power on and update will start (approx 3-4 minutes).
5) Link LED will turn off during this process. Upon completion, Link LED should
turn back on.
Receiver Firmware
1) Download the software on a USB flash drive. The file name will be similar to
cavm_netHD.bin.
2) Turn off device.
3) Plug USB Flash drive with downloaded firmware into transmitter using a
Female USB to USB Mini Male Adapter.
4) Turn the power on and update will start (approx 3-4 minutes).
5) Link LED will turn off during this process. Upon completion, Link LED should
turn back on.
6) Monitor screen will be displayed when complete.