Slider – ikan SLD-01 User Manual
Page 5
Slider
QUICKSTART GUIDE
www.ikancorp.com
713-272-8822
TABLETOP FEET HEIGHT ADJUSTMENT
4. Proper balance can be achieved by loosening or tightening the Adjustment Knob,
which will raise or lower the height of that Foot, while using the Level located at the
center of the Slider Base as a reference. Tighten the Lock Knob to secure.
TABLETOP FEET MOUNTING OPTION
3. Mounting the Tabletop Feet to your Slider is quick and easy. First, turn the Slider
up-side-down. Next, line up the 3/8-16 holes at the ends of your Slider with the
3/8-16 hole at the center of the Tabletop Feet. Make sure the Tabletop Feet are
pointing up. Insert one of the 0.85” 3/8-16 Thumb Screws through the Tabletop
Feet and into the Slider base, and tighten. Repeat these steps for the second set
of Tabletop Feet, using the second 0.85” 3/8-16 Thumb Screw.
Adjustment Knob
Lock Knob