Telescoping arm adjustments – ikan JIB-01C User Manual

Page 7

Telescoping

Arm Adjustments:

• All twist locks are tightened

• You have leveled Jib

• Fully tighten the Jib level knob

•Make sure you have measured out your

camera and prepared the correct amount of

counterbalance weight needed.
• Stabilize the Jib arm with a chair table or stand

and engage the pan and tilt locks

*Please note that the telescoping twist locks have a passive locking mechanism. If the twist lock

only moves a small amount when loosening you are protected from abrupt sliding of the jib

stages. The lock will break loose with an additional hard twist and allow adjustment as desired

. Before moving on to the next step mounting the camera please be certain: