How to change mounts – ikan FLY-X3-PLUS User Manual

Page 8

HOW TO CHANGE MOUNTS:

You may change the mounts on the

FLY-X3-PLUS to accept to GoPro,

smaller and larger smart phones.

Remove the hex screws from the

smart phone cradle.

To remove the mount, press the

clamp towards the top as indicated

by the arrows. The cradle will slide up

and out. The Mount will release from

the slotted gimbal head and you may

change mounts.

You may install the GoPro or small

phone mount by inserting into slots

and sliding into position and replacing

the hex screws.