IHSE USA 238 Series Media Converter - Manual (Page 58)

K238 Media- / DVI-Converter
58
2013-08-13
8.2 Picture
Diagnosis Possible Reason Measure
Connection between
disturbed  Check connection, length and
quality of the DVI-D cable to
monitor, tighten cable
thumbscrews.
Incorrect picture
display
Transmission
parameters not suitable
or not optimally set for
conditions.  Run 'Auto Configuration'
(see Chapter 5.3.2, Page 27).
 If necessary, set parameters for
picture settings manually (e.g.
phase and clock) (see
Chapter 5.3.2, Page 27).
Parts of the
picture are
missing Wrong setting of picture
size  Optimize picture settings (see
Chapter 6.1, Page 37).
Horizontal
picture jitter Wrong settings of phase
and clock  Readjust phase and clock
manually (see Chapter 5.3.2,
Page 27).
Characters are
smeared Wrong setting of phase  Readjust phase manually (see
Chapter 5.3.2, Page 27).
Fine vertical
lines are
missing Wrong setting of clock  Readjust clock manually (see
Chapter 5.3.2, Page 27).
Pos: 57 /806-IHSE/Hilfe im Problemfall/Allgemeine Störung/238-5v-xx @ 5\mod_1291135298421_6.doc @ 45749 @ @ 1
8.3 General
Diagnosis Possible Reason Measure
Infrared remote
control is non-
functional Wrong device selected  Press the button on
the infrared remote control to get
a device-independent access to
the functions.
Pos: 58 /806-IHSE/Technische Unterstützung/ATB_Technische Unterstützung @ 5\mod_1278579487089_6.doc @ 42650 @ 122 @ 1