IBEA HY-704 - Manual (Page 17)

ENGLISH GB
17
5. TECHNICAL DATA AND DECLARATION OF CONFORMITY
ACTIVE s.r.l. Via Delmoncello 12 - 26037 San Giovanni in Croce (CR)
declares under our sole responsibility that the machine brand IBEA:
MODEL
HANDLEBAR / HANDLE
Ø TRANSMISSION TUBE
POWER
SPEED
WEIGHT (motor unit only)
CABLE LENGTH
in compliance with the requirements of Directives 2006/42/EC, 2000/14/EC, 2004/108/EC, 2002/44/EC
IBEA HY-70
HANDLE
Ø 26
750 W continuous
7000 rpm/min
3,8 Kg
1,5 m
BATTERY CHARGER
MAINS VOLTAGE
FREQUENCY
MOTOR UNIT
B4 / B6 B8
BATTERY (Lithium / Polymer)
WEIGHT
VOLTAGE
CAPACITY
STORED ENERGY
MINIMUM OPERATING LIFE
BATTERY CHARGE TIME
Battery life has been surveyed from actual working time without pause and with medium cut.
This may vary depending on the tool used and work to be performed.
36 V
10 Ah 15 Ah
B4 B6
3,5 Kg 5 Kg
360 Wh 540 Wh
1000 CYCLES
4 h
BA TT E R I E S
B8
6 Kg
20 Ah
720 Wh
47 - 63 Hz
SSLCO84V42
100 - 240 V 90 - 264 V
47 - 63 Hz
ES-3604SL
ALBERTO GRIFFINI
PRESIDENTE
ACTIVE S.r.l.
Via Delmoncello, 12
26037 San Giovanni in Croce (CR) - ITALY
11/03/2014