Appendix b: how to flash the image to emmc – IBASE MRS-801-RE User Manual

Page 91

IBASE Technology Inc.

Appendix B: How to flash the image to eMMC

(For advanced users only) This is just an example ( form SMARC eval

kit) if users have the ability to customize the system in the SD card.

Users can flash the current SD image system (standard or customized

by user) to eMMC by using the following method.

Use “fdisk -l” command to check current storage devices, current boot

device is represented as /dev/mmcblk1,

SMARC module’s eMMC

device is /dev/mmcblk0

#sudo fdisk

–l

Flash Module eMMC:
# cd flash_emmc/rp100_emmc
# ./fsl-sdcard-partition.sh

–f /dev/mmcblk0

Remember to remove the special dongle, then, you can boot from

eMMC (the IB102 default status) with the above concept.