IBASE SI-60E - Manual (Page 38)

30 SI-60E User Manual
Shutdown Temperature Configuration
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
→ ← Select Screen
↑↓Select Item
Enter: Select
+- Change Opt.
F1:General Help
F2:Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
APCI Shutdown Temperature Disabled
ACPI Shutdown Temperature
The default setting is Disabled.
iSmart Controller 3.1
Aptio Setup Utility – Copyright © 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
iSmart Controller 3.1
→ ←Select Screen
↑↓Select Item
Enter: Select
+- Change Opt.
F1:General Help
F2:Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Power-On after Power failure
PWR Resume Delay
PWR Resume Delay Value(Seconds)
Temperature Guardian
Enable
Enable
5
Disable
Schedule Slot 1 None
Schedule Slot 2 None
Power-On after Power failure
This field sets the system power status whether Disable or Enable when power returns to the
system from a power failure situation.
Temperature Guardian
Generate the reset signal when system hangs up on POST.
Schedule Slot 1 / 2
Setup the hour/minute for system power on.