IBASE IB930 - Manual (Page 18)

INSTALLATIONS
CN3: PS/2 Keyboard and Mouse Connector
CN3 is the PS/2 keyboard/mouse connector that is on the bracket of the
CPU card. It uses a Y-cable for a PS/2 keyboard and a PS/2 mouse.
CN3
Pin # Signal Name
1 Keyboard data
2 Mouse data
3 Ground
4 Vcc
5
Keyboard Clock
6 Mouse Clock
UJ1: USB Connector
UJ1 is the single-port USB connector that is on the bracket of the CPU
card.
CN4: VGA Connector
CN4 is the VGA connector that is on the bracket of the CPU card.
[[[[
Signal Name Pin # Pin # Signal Name
Red 1 2 Green
Blue 3 4 N.C.
GND 5 6 GND
GND 7 8 GND
N.C. 9 10 GND
N.C. 11 12 N.C.
HSYNC 13 14 VSYNC
NC 15
J16: RJ45 Connector
J16 is the RJ-45 connector that is on the bracket of the CPU card. The
figure below shows the pin out assignments of the connector and its
corresponding input jack.
Active LED
Link LED
RJ-45
14 IB930 User’s Manual