IBASE IB930 - Manual (Page 10)

INSTALLATIONS
Installing the CPU
The IB930 CPU card supports a Socket 478MT processor socket
for Intel® Core
TM
Duo and Intel® Core
TM
Solo processors
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the inside
of the socket. Once the processor has slide into the socket, fasten the
screw. Refer to the figures below.
After you have installed the processor into the socket, check if the
jumpers for the CPU type and speed are correct.
NOTE: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
6 IB930 User’s Manual