Advanced chipset features, Bios setup, Ib530f user’s manual – IBASE IB530 User Manual
Page 32
BIOS SETUP
28
IB530F User’s Manual
Advanced Chipset Features
This Setup menu controls the configuration of the chipset.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
CPU Frequency
Auto
ITEM HELP
Memory Frequency
Auto
Menu Level >
CAS Latency
Auto
Video Memory Size
8M
Output Display
CRT
Flat Panel Configuration
Press Enter
Onboard Audio
Enabled
Overcurrent Reporting
Disabled
Port 4 Assignment
Host
Memory Hole at 15M-16M
Disabled
CPU Frequency
This options for this field are Auto, 433MHz and 500MHz.
Memory Frequency
This default setting for this field is Auto. Other options are 100MHz,
133MHz, 166MHz, and 200MHz.
CAS Latency Time
You can configure CAS latency time in HCLKs as 1.5, 2, 2.5, 3 or 3.5.
The system board designer should set the values in this field, depending
on the DRAM installed. Do not change the values in this field unless you
change specifications of the installed DRAM or the installed CPU.
Video Memory Size
The default setting for this field is 8M. The options are from 8M to
254M.
Flat Panel Configuration
This options for this field are Flat Panel, CRT and Panel & CRT. For
flat panel, configuration settings include Flat Panel Type, Resolution
(320x240 up to 1600x1200), Data Bus Type, Refresh Rate (60~100Hz),
HSYNC Polarity, VSYNC Polarity, SHFCLK Active Period and LP
Active Period.
Memory Hole At 15M-16M
In order to improve performance, certain space in memory can be
reserved for ISA cards. This memory must be mapped into the memory
space below 16 MB. The choices are Enabled and Disabled.