beautypg.com

Jp1: clear cmos setting, Jp2: lvds vdd select (5v / 3.3v), Jp3: hdd led pin header – IBASE IB530 User Manual

Page 13: Jp4: cf connector master/slave setting, Jp5, jp6: com3,4 rs232 +5v/+12v power setting, Normal (default), 5v jp3: hdd led pin header, Jp4 setting function, Short/closed master, Jp5, jp6 setting function

background image

INSTALLATIONS


JP1: Clear CMOS Setting
Use JP1 to clear the CMOS contents. Note that the power connector
should be disconnected from the board before clearing CMOS.

JP1

Function

Normal (default)

Clear CMOS

JP2: LVDS VDD Select (5V / 3.3V)

JP2

VDD Setting

3.3V

5V

JP3: HDD LED Pin Header


Pin #

Signal Name

1 VCC

2

HDD_LED-

JP4: CF Connector master/Slave Setting

JP4

Setting

Function

Short/Closed

Master

Open Slave


JP5, JP6: COM3,4 RS232 +5V/+12V Power Setting

JP5, JP6

Setting

Function

Pin 1-2

Short/Closed

+12V

Pin 3-4

Short/Closed

Normal

Pin 5-6

Short/Closed

+5V

IB530F User’s Manual

9

See also other documents in the category IBASE Computers: