IBASE IB908 - Manual (Page 48)

BIOS SETUP
44 IB908F User’s Manual
LCD Control
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
LCD Control
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
Primary IGFX Boot Display VBIOS Default
LCD Panel Type
DC Output level
1024x768 LVDS
LEVEL4
LCD Chanel Type
LVDS BackLight brightness volt Control
Active LFP
Single
3.3V
No LVDS
Panel Color Depth 24 Bit
Primary IGFX Boot Display
Select the Video Device, which will be activated during POST. This has
no effect if external graphics present.
Secondary boot display selection will appear based on your selection.
VGA modes will be supported only on primary display.
LCD Panel Type
Select LCD panel used by Internal Graphics Device by selecting the
appropriate setup item: 640x480 LVDS ~ 2048x1536 LVDS.
DC Output level
Backlight Brightness Control
LCD Chanel Type
Select LCD Chanel Type
LVDS Back Light Brightness Volt Control
LVDS Back Light Volt Control: 3.3V, 5V
Active LFP
Select the Active LFP Configuration.
No LVDS: VBIOS does not enable LVDS.
Int-LVDS: VBIOS enables LVDS driver by Integrated encoder.
SDVO LVDS: VBIOS enables LVDS driver by SDVO encoder.
eDP Port-A: LFP Driven by Int-DisplayPort encoder from Port-A.
Panel Color Depth
Select the LFP Panel Color Depth: 18 Bit, 24 Bit.