HuddleCamHD RS-232 - Manual (Page 5)

Main Menu .
 Keyboard Menu
o
To enter the keyboard menu press “1”,”0”,”0”,”0” + “Preset”.
o
Move joystick “up” and ”down” to operate the cursor position of
the menu.
o
Use “open” to confirm the choice.
o
Also use “open” to select next parameter setting.
o
Use “close” to select previous parameter setting.
o
Select “Exit” from the menu or press “near” button to return to
previous menu.
o
Use number keys “0” to “9” to input data.
 Keyboard Setup Menu
o
Protocol: Choose from Pelco-P, Pelco-D, VISCA protocols.
o
Baud Rate: 1200, 2400, 4800, 9600bps.
 Function Key Setting
o
Keys: F1, F2, F3, F4, F5, F6 may be programmed with shortcuts.
o
The functions available are:
 Arrow Key, Reset Demo, Camera SW, Goto Zero, Zoom Set,
Position, Camera BL, Manual Focus, Auto Focus, Disable &
Clear Preset(s).
 Light & Sound Setting(s)
o
Backlight timing for LCD:
 10 minutes, 5 minutes, On or Off.
o
Sound:
 Key press beep: on or off.
 Absolute Position Setting
Allows precision setting of pan + tilt positions.
o
Set: the camera will rotate to the corresponding pan & tilt
position entered.
o
Query: Query the present position of camera and display it after
pan & tilt.
 Absolute Zoom Setting
Allows precision setting of the zoom position.
The maximum optical zoom control is 18 times.
 Language Setting (English or Chinese)
Note: All operations above are based on the assumption that you are using Pelco-P
or Pelco-D protocol. Other protocols have their own standards for functions,
so there will be minor differences when operating functions such as Absolute
Position setting and Absolute Zoom setting.