Specifications -4, Safety, introduction & specifications – Hypertherm HT400 Air Injected Water Muffler System User Manual
Page 11
SAFETY, INTRODUCTION & SPECIFICATIONS
Page 1-4
Air Injected Water Muffler System
Instruction Manual
SPECIFICATIONS
Air Control Box (# 028298)
Input Power ................................................. 120 VAC
Input Air Pressure ........................................ 80 -120 psi (5.5-8.3 bar) @ 20 scfm
(566 l/m) minimum
Weight ......................................................... 6 lbs. (2.7 kg)
Dimensions .................................................. 6-1/4" (159mm) (H) x 6-1/4" (159mm)
(W) x 4-1/4" (108mm) (D)
Pump* (# 031006, # 031088, # 031089)
Input Power:
# 031006 .................................................... Pump (3/4 DL) assembly with motor, 2
HP, 3500 RPM 230/460, 3 PH, 60 Hz
# 031088 .................................................... Pump (3/4 DL) assembly with motor, 2
HP, 3500 RPM 380-415V, 3 PH, 50 Hz
# 031089 .................................................... Pump (3/4 DL) assembly with motor, 2
HP, 3500 RPM 575V, 3 PH, 60 Hz
Maximum Working Pressure ....................... 100 psig (6.9 bar)
Duty ............................................................. Continuous
Direction of Rotation .................................... Clockwise (viewed from motor end)
Output .......................................................... 18-20 GPM
Weight ......................................................... 85 lbs. (38.6 kg) (includes base and
pump contactor box)
Dimensions .................................................. 19" (482mm) (H) x 11" (279mm) (W) x
17" (432mm) (D) (includes base and
pump contactor box)
* Refer to the Appendix for additional pump specifications.
Pump Contactor (# 003017)
Contactor ..................................................... Size 00, 120 VAC Coil