Hypertherm PCBS-0124 - Manual (Page 66)

Award BIOS Setup
62
3.11 Frequency/Voltage Control
Phoenix - AwardBIOS CMOS Setup Utility
Frequency/Voltage Control
CPU Clock Ratio
Watch Dog Function
CPU FSB / SPEED
Memory Frequency
Next boot AGP/PCI is
AGP / PCI Clock
AGP/PCI subtle tuning
Clock Generation for EMI
22X
Enabled
100MHz/2.40GHz
Auto=>DDR266
66/33MHz
Auto
66MHz
Press Enter
Item Help
____________________________
Menu Level
¾
↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
CPU Clock Ratio:
This item allows you to set up the CPU clock ratio, but this function depends
on different CPU performance. It is only effective for those clock ratio
haven’t been locked.
Watching Dog Function
If you select enabled and overclock fail before POST code 26h, the system
will reset automatically by default configuration.
The choice: Enabled, Disabled.
CPU FSB / SPEED:
This item allows you to enabled or disabled the CPU FSB speed.
The choice: 90MHz~ 200MHz.
Memory Frequency:
Enables you to select a ratio of the Double Data Rate Synchronous DRAM to
match the installed DRAM frequency 200/266/333MHz.
AGP/PCI Clock:
Enables you to select host clock to work concurrently with the PCI bus or the
AGP bus.
AGP/PCI subtle tuning:
Enables you to select AGP/PCI frequency.