Hypertherm PCBS-0124 - Manual (Page 54)

Award BIOS Setup
50
3.7 Integrated
Peripherals
Phoenix - AwardBIOS CMOS Setup Utility
Integrated Peripherals
¾ Onboard IDE Device Setup
¾ Onboard PCI Device Setup
¾ Onboard I/O Chip Setup
Init Display First
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
Intel LAN Boot ROM
Press Enter
Press Enter
Press Enter
Onboard AGP
3E8
IRQ10
2E8
IRQ11
Disabled
Item Help
____________________________
Menu Level
¾
↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
Onboard IDE Device Setup:
Phoenix - AwardBIOS CMOS Setup Utility
Onboard IDE Device Setup
On-Chip Primary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
IDE HDD Block Mode
Enabled
Auto
Auto
Auto
Auto
Enabled
Auto
Auto
Auto
Auto
Enabled
Item Help
____________________________
Menu Level
¾
↑↓←→Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
On-Chip Primary/Secondary PCI IDE:
The integrated peripheral controller contains an IDE interface with support
for two IDE channels. Select “Enabled” to activate each channel separately.
The choice: Enabled, Disabled.