Hypertherm Duramax Hyamp Robotic Torch - Manual (Page 37)

Duramax/Duramax Hyamp Robotic Torches Service Manual 807460 37
2 – Torch Setup
Duramax Hyamp robotic torches
Duramax Hyamp robotic torches ship with a consumable kit that includes enough consumables to create a complete
consumable set for 45, 65, 105, or 125 amperage shielded cutting. Also notice that specific consumables are not
available for cutting at 85 A. Use the standard (drag-cutting) 105/125 A consumables to cut at 85 A. An ohmic-sensing
retaining cap is available for use with shielded consumables, and FineCut
® consumables are available for fine-featured
cutting on thin materials. All 3 styles of Duramax Hyamp robotic torches use the same consumables.
Duramax Hyamp consumables
Duramax Hyamp mechanized shielded 105 A/125 A*
Duramax Hyamp mechanized shielded 45 A, 65 A*
Duramax Hyamp FineCut shielded*
*Ohmic-sensing retaining cap
You can use the ohmic-sensing retaining cap (420156) with the above consumable sets instead
of the standard retaining cap (220977).
Duramax Hyamp gouging
220976
Shield
220975
Nozzle
220971
Electrode
220997
Swirl ring
220977
Retaining cap
420168
Shield
220977
Retaining cap
420158 (45 A)
420169 (65 A)
Nozzle
220971
Electrode
220997
Swirl ring
420152
Shield
420151
Nozzle
220971
Electrode
220997
Swirl ring
220977
Retaining cap
420112
Shield
220977
Retaining cap
420001
Nozzle
220971
Electrode
220997
Swirl ring