Dixon 8950-598 - Manual (Page 29)

Page 29
1. Push the valve body in and twist into the detent notch.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine
literature.
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
CARE AND MAINTENANCE
CHASSIS: Number of grease zerks used: (7)
LOCATIONS: (1) each front wheel caster and each front wheel hub.
(1) each mower deck
SERVICE INTERVALS: Every 50 hours of operation
RECOMMENDED GREASE: Name brand wheel bearing or multi-purpose grease
Lubricate each front wheel to allow even distribution of
grease within the wheel, rotate or spin each front wheel
after (3) pumps of the grease gun. Repeat process until the
appearance of grease is noted completely around each
caster axle.
Lubrication of the mower deck hubs will help dispel moisture
within the hub casting. Bearings are of a sealed variety.
OIL FILL:
Open Closed
LUBRICATION: