Horton Storm RDX - Manual (Page 4)

Keep your fingers and thumb
on your fore-grip hand below the string and
arrow flight deck when you fire your crossbow.
Otherwise, the bow string will severely injure or
amputate them when you pull the trigger.
The Storm RDX comes standard with rubber
safety wings which are designed to help keep
the shooter’s fore-grip fingers and thumb safely
below the flight deck while shooting. The wings
are bedded between the fore-grip and barrel.
If for any reason they are lost or damaged,
contact Horton for replacement immediately at
www.hortoncrossbows.com or 330-628-9245.
STRINg & CABLE
ADJUST CHEEK PIECE & BUTT PLATE
The Storm RDX is equipped with a rubber cheek piece that adjusts to any of seven
fixed positions to create perfect eye-level alignment, and a butt plate that adjusts to
one of three fixed positions to match up perfectly with the shooter’s
length-of-pull.
Cheek Piece Adjustment:
1. To adjust the cheek piece, remove both
3 ⁄
16
'' x ½'' shoulder screws using a 3 ⁄
32
''
Allen wrench.
2. Slide the cheek piece over the desired alignment holes to create your perfect
eye-level alignment (photo 1).
3. Replace the screws once you have the proper adjustment for your
shooting needs.
Butt Plate Adjustment:
1. To adjust the rubber butt plate, remove both
3 ⁄
16
'' x ½'' shoulder screws using a
3 ⁄
32
'' Allen wrench.
2. Slide the butt plate into one of three fixed positions for your perfect length-of-pull
(photo 2).
3. Replace the screws once you have the proper length.
INTEgRATED SAFETY WINgS & FORE-gRIP
DANGER
Part Number Length Materials Twists
String: HCA-12215 String: 40.875'' String: D97, 28-strands String: Pre-twisted
Cables: HCA-13115 Cables: 15.1875'' Cables: D97, 28-strands Cables: Pre-twisted
3
Safety wings are bedded between the
stock and barrel. They help prevent
thumb and finger injury and they
dampen noise.
Slide butt plate into one of three fixed positions.
Slide cheek piece over desired alignment holes.
Proper hand position.
1
2
SPECIFICATIONS