Denon ASD-51N - Manual (Page 20)

ENGLISH
Get
ting Star
ted
Connections
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
Specifications
Making Detailed Settings (Setup)
Setting items Setting contents
Network Setup
(Continued)
y Use uio p to input the proxy server port number
and press ENTER .
u Use i to select “Exit” and press ENTER .
Setup is complete.
Network Info
Display
network
information.
DHCP= ON/OFF / IP Address / MAC Address
Set the language for display on the GUI screen.
Setting contents
English / Français / Deutsch / Español /
Making Language Settings
(Language)
Default settings are underlined.
Setting items Setting contents
Screensaver
Make screensaver
settings.
Use the screensaver
to prevent burn-in on
the monitor screen. ON : When set to “ON”, the screensaver is activated if
there is no activity for about 3 minutes.
OFF : Screen saver is not activated.
Format
Select the video
output
signal
format to match the
monitor.
NTSC : Select NTSC output.
PAL : Select PAL output.
b
Normally there is no need to set this.
NOTE
When a format other than the video format of the
connected monitor is set, the picture will not be displayed
properly. Use the procedure described below to change
the video format.
• Set to NTSC
Press and hold TOP MENU and PAGEu for at least 3
seconds.
“NTSC” is set.
• Set to PAL
Press and hold TOP MENU and PAGEi for at least 3
seconds.
“PAL” is set.
GUI Timeout
Set the GUI display
time
when not
operating.
Always : Show display continuously.
10s : Show display for 10 seconds after operation.
30s : Show display for 30 seconds after operation.
Make GUI related settings.
Making the GUI settings (GUI)
Default settings are underlined.
Set
ting