HONDA 2011 Civic Hybrid User Manual

Page 124

−

The scan function gives

you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
scan, press the SCAN button. The
system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
button again.

You can store up to 12

preset channels using each side of
the preset button. Each side of the
button stores one channel from the
XM1 band and one channel from the
XM2 band.

To store a channel:

Use the tune, seek, or scan
function to tune to a desired
channel.

In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.

XM is loading the

audio or program information.

The channel

currently selected is no longer
broadcasting.

The encryption

code is being updated. Wait until the
encryption code is fully updated.
Channels 0 and 1 should still work
normally.

The signal is

currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.

Pick a preset number you want for
that channel. Press and hold the
button until you hear a beep.

Repeat steps 2 and 3 to store the
first six channels.

Once a channel is stored, press and
release the proper side of the preset
button to tune to it.

Press the AUX button. Either XM1
or XM2 will show in the display.

Press the AUX button again. Store
the next six channels using steps 2
and 3.

SCAN

Preset

XM Radio Display Messages

‘‘LOADING’’

‘‘OFF AIR’’

‘‘UPDATING’’

‘‘NO SIGNAL’’

Playing the XM Radio (Models without navigation system)

118

10/06/24 19:46:53 31SNC650_123