HONDA 2011 Civic Hybrid - Manual (Page 113)

Set the temperature to the lower
limit.
Make sure the A/C is off.
Select
and fresh air mode.
Set the fan to the desired speed.
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
). If it moves near the red zone,
turn off the A/C until the gauge
reading returns to normal.
Turn on the A/C by pressing the
button. The indicator in the button
comes on when a fan speed is
selected.
Make sure the temperature is set
to maximum cool.
Select
.
If the outside air is humid, select
recirculation mode. If the outside
air is dry, select fresh air mode.
Set the fan to the desired speed.
If the interior is very warm, you can
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in fresh air mode.
Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry and
can prevent the windows from
fogging up.
Select .
When you select , the system
automatically switches to the fresh
air mode.
Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control dial.
This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).
Turn the fan on.
Turn on the air conditioning.
Select
and fresh air mode.
Adjust the temperature to your
preference.
The ventilation system draws in
outside air, circulates it through the
interior, then releases it through
vents near the rear window.
1.
2.
3.
4. 1.
2.
3.
4.
5.
1.
2.
3.
1.
2.
3.
4.
66
Climate Control
Ventilation
Using the Heater
Using the A/C Dehumidif y the Interior
Fe
a
tu
re
s
107
10/06/24 19:45:27 31SNC650_112