Hoist Fitness HD-1700 - Manual (Page 43)

HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Locks, Swivels, Weight Stack Pins:
Upholstery:
Guide Rods:
Decals:
Nuts and Bolts:
Anti-Skid Surfaces:
Cables:
F
F
F
F
F
F
F
F
F
F
F
F
F
F
Check all pieces for signs of visible wear or damage.
Check springs in snap hooks and pull-pins for proper tension and alignment.
If the spring sticks or has lost its rigidity, replace it immediately.
To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped down with a damp
cloth after every workout.
Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the onset of cracking or
drying. Avoid using any abrasive cleaners or cleaners not intended for use on vinyl.
Replace ripped or worn upholstery immediately.
Keep sharp or pointed objects clear of all upholstery.
Wipe clean with a dust free rag. Lubricate once a week with a Silicon or Teflon based lubricant.
Inspect and familiarize yourself with any safety warnings or other user information posted on each decal.
nspect all nuts and bolts for any loosening and tighten if needed.
Go through a re-tightening sequence periodically to ensure that all hardware is tensioned properly.
These surfaces are designed to supply secure footing and need to be replaced if they appear worn or become slippery.
Hoist uses only Aircraft Quality Cable which meets or exceeds military specifications. Although our cables are
designed to last for years, to ensure optimum performance and as a routine safety precaution we recommend that all
cables be replaced yearly.
Visually inspect the cable for fraying, cracking, peeling or discoloration.
While the machine is not in use, carefully run your fingers along the cable to feel for thinning or bulging areas.
Replace cables immediately at the first signs of damage or wear. Do not use equipment until cables have been
replaced.
I
F
F
OW N E R S
M A N U A L
HD1700 Assembly
Page - 42