Hoist Fitness RS-1501 - Manual (Page 27)

OWNER'S MANUAL
RS-1501 ASSEMBLY PAGE 26
Belt and Cable Tension:
Referring to the Owners Manual, when belts or cables are used check all bolts attachments to •
be sure they are properly attached.
Check slack in cables and re-adjust cable tension if needed. •
Seat Sleeves, Guide Rods:
Wipe down adjusting tubes with a dust free rag before applying lubricant. •
Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray. •
Linear Bearings:
Referring to the Owners Manual carefully disassemble the bearing from its housing and place a •
finger full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your
finger, press the grease into the ball-bearings and their tracks. repeat until the ball-bearing
tracks are full of grease. Insert the shaft back into the bearing and wipe off excess grease.
GENERAL MAINTENANCE INFORMATION
PLEASE KEEP THIS FOR YOUR RECORDS
(CONTINUED)