Hoist Fitness RS-1501 - Manual (Page 26)

OWNER'S MANUAL
RS-1501 ASSEMBLY PAGE 25
HOIST FITNESS SYSTEMS
GENERAL MAINTENANCE INFORMATION
Links, Pull-Pins, Snap Hooks, Swivels, Weight Stack Pins:
Check all pieces for signs of visible wear or damage. •
Check springs in snap hooks and pull-pins for proper tension and alignment. •
If the spring sticks or has lost its rigidity, replace it immediately. •
Upholstery:
To ensure prolonged upholstery life and proper hygiene, all upholstered pads should be wiped •
down with a damp cloth after every workout.
Periodically take the time to use a mild soap or an approved vinyl upholstery cleaner to deter the •
onset of cracking or drying. Avoid using any abrasive cleaners or cleaners not intended for use
on vinyl.
Replace ripped or warn upholstery immediately. •
Keep sharp or pointed objects clear of all upholstery. •
Decals:
Inspect and familiarize yourself with any safety warnings or other user information posted on •
each decal.
Nuts and Bolts:
Inspect all nuts and bolts for any loosening and tighten if needed. •
Go through a re-tightening sequence periodically to ensure that all hardware is tensioned proper. •
Anti-Skid Surfaces:
These surfaces are designed to supply secure footing and need to be replaced if they appear •
worn or become slippery.
Belts and Cables:
Hoist uses only high quality belt, and mil-spec cables. •
Visually inspect the belts and cables for fraying, cracking, peeling or discoloration. •
While the machine is not in use, carefully run your fingers along the belt or cable to feel for •
thinning or bulging areas.
Replace belts and cables immediately at the first signs of damage or wear. Do not use equipment •
until belts or cables have been replaced.