Denon DVD-2800II - Manual (Page 13)

13
ENGLISH
(5) Connecting to a Stereo Component
L
R
Y
P B /C B
P R /C R
OPTICAL COAXIAL
VIDEO
OUT
COMPONENT
VIDEOOUT
S-VIDEO
OUT
DIGITAL OUT
(PCM/BITSTREAM) AUDIO
OUT
VIDEO IN
TV
DVD-2800
Stereo component
5 PART NAMES AND FUNCTIONS
(1) Front Panel
See page 3.
q
Power button
• Press once to turn the power on.
• Press again to set to the “OFF” position and turn the
power off.
• Set the power to the standby mode by pressing the
POWER button on the remote control unit while the
power is on.
• Turn the power on from the standby mode by pressing the
POWER button on the remote control unit.
w
Power indicator
• This indicator lights when the power is on and when the
power is in the standby mode.
e
HDCD indicator
• This indicator lights when playing discs recorded in
HDCD ® format. (NOTE 1)
r
Progressive Scan indicator
• Lights when progressive is selected as the video output.
t
Disc tray
• Load discs here. (See page 17.)
• Press the OPEN/CLOSE button
y
to open and close the
disc tray.
• The disc tray is also closed when the PLAY button
u
is
pressed.
y
OPEN/CLOSE button ( 5 OPEN/CLOSE)
• Press this button to open and close the disc tray.
(See page 17.)
u
PLAY button ( 1 PLAY)
• Press this button to play the disc. (See page 18.)
i
STILL/PAUSE button ( 3 STILL/PAUSE)
• Press this button to pause images or music or to play
images frame by frame. (See page 20, 21.)
o
STOP button ( 2 STOP)
• Press this to stop the disc. (See page 20.)
!0
Skip button ( 8 )
• Press this to move back to the beginning of the current
track (or chapter).
• Press again to move back to the beginning of the previous
track (or chapter). (See page 21.)
!1
Slow/Search button ( 6 )
• Press this to set the slow play mode and to search in the
reverse direction. (See page 20, 21.)
!2
Skip button ( 9 )
• Press this to move ahead to the beginning of the next
track (or chapter). (See page 21.)
!3
Slow/Search button ( 7 )
• Press this to set the slow play mode and to search in the
forward direction. (See page 20, 21.)
!4
Remote control sensor
!5
Display
• Information on the disc that is currently playing is shown
on the display. (See page 14.)
NOTE:
• Set the “ TV TYPE ” in “ VIDEO SETUP ” in “ SETUP ” to comply with your TV's video format. When the TV is NTSC formated, set to NTSC.
(See page 41.)