Hoist Fitness HF4664 - Manual (Page 22)

PAGE 21 HF4664 ASSEMBLY
OWNER'S
MANUAL
Belt and Cable Tension:
*Referring to the Owners Manual, when belts or cables are used check all bolts attachments to be sure
they are properly attached.
*Check slack in cables and re-adjust cable tension if needed.
Seat Sleeves, Guide Rods:
*Wipe down adjusting tubes with a dust free rag before applying lubricant.
*Lubricate seat sleeves and Guide Rods with a Silicon or Teflon based lubricant spray.
Linear Bearings:
*Referring to the Owners Manual carefully disassemble the bearing from its housing and place a finger
full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the
grease into the ball-bearings and their tracks. repeat until the ball-bearing tracks are full of grease.
Insert the shaft back into the bearing and wipe off excess grease.
GENERAL MAINTENANCE INFORMATION
PLEASE KEEP THIS FOR YOUR RECORDS
(CONTINUED)