Denon AVR-989 User Manual
Page 2
1736 0608 A
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500 usa.denon.com
Denon Canada Inc.
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: 905-475-4085 ca.denon.com
Input / Output Terminals:
IN
HDMI
4
Component
3
S-Video 7
Composite
7
Analog Audio (Tuner included)
10
Analog EXT. Input
7.1ch
Digital OPTICAL
3
Digital COAXIAL
3
OUT
HDMI Monitor
1
Component Monitor
1
S-Video Monitor
1
REC
2
Composite Monitor
1
REC
2
Analog Audio REC
2
Zone 2
1
Audio PRE out (7.1ch)
1
Digital OPTICAL
1
Others
Dock Control Port
1
Sirius Connector
1
XM Connector
1
FM Tuner Antenna
1
AM Tuner Antenna
1
Remote In/Out
1
RS232C
1
Trigger Output (+12V, 150mA)
2
*Design and specifi cations are subject to change without notice.
*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
*DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and
DTS-HD Master Audio are trademarks of DTS, Inc.
*“Neural” and “Neural Audio” and “Neural Surround” are trademarks of
Neural Audio Corporation.
*Audyssey MultEQ
®
is a registered trademark of Audyssey Laboratories.
Audyssey Dynamic EQ
™
is a trademark of Audyssey Laboratories. Audyssey
Dynamic Volume
™
is a trademark of Audyssey Laboratories.
*“HDMI”, “HDMI logo” and “High-Definition Multimedia Interface” are
trademarks or registered trademarks of HDMI Licensing LLC.
*iPod
®
is a trademark of Apple Inc., registered in the U.S. and other
countries.
*”DCDi™” is a trademark of Faroudja, a division of Genesis Microchip Inc.
*The XM name and related logo are registered trademarks of XM Satellite
Radio reserved.
*XM Ready
®
is a registered trademark of XM Satellite Radio Inc.
Main Specifi cations:
Power amplifi er section
Rated output
*THD fi gures are power amp stage values.
Front L/R
115 W + 115 W
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
145 W + 145 W
(6 ohms, 1 kHz, THD 0.7%)
Center
115 W
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
145 W
(6 ohms, 1 kHz, THD 0.7%)
Surround L/R
115 W + 115 W
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
145 W + 145 W
(6 ohms, 1 kHz, THD 0.7%)
Surround Back L/R
115 W + 115 W
(8 ohms, 20Hz - 20kHz, THD 0.08 %)
145 W + 145 W
(6 ohms, 1 kHz, THD 0.7%)
Preamplifi er section
Input sensitivity/impedance 200 mV / 47 kΩ/kohms
Frequency response
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N Ratio
100 dB (IHF-A weighted, DIRECT mode)
FM section
Tuning frequency range
87.5 - 107.9 MHz
Usable sensitivity
1.0 μV (11.2 dBf)
AM section
Tuning frequency range
520 - 1710 kHz
Usable sensitivity
18 μV
General
Power supply
AC 120 V, 60 Hz
Power consumption
6.0A (Standby 0.1W)
Dimensions (W x H x D)
434 x 171 x 414 mm
17-3/32” x 6-47/64” x 16-19/64”
Weight 12.8
kg
28 lbs 3.5 oz
State-of-the-art Denon Solutions for
Maximizing Content Quality
• Robust power source for each block, for stable supply of current
To produce a clear, stable power circuit that prevents unwanted
noise from aff ecting the sound, the AVR-989 has dedicated
CPU and Standby transformers that are separate from the
audio and video circuitry. The AVR-989 is endowed with a
powerful rectifi er circuit with 15,000μF block capacitors and a
bridge diode of 8A capacity, surpassing typical models in this
price range, to supply stable current with negligible noise.
• Minimum Signal Path
The "simple and straight" design concept has been thoroughly
implemented in the signal paths to contribute to immaculately
clean audio and video playback.
Signal paths are as short as possible to keep signal degradation
in the audio and video circuitry to an absolute minimum.
• Direct Mechanical Ground
Vibration-resistant construction has been reviewed to thoroughly
suppress the adverse infl uences of vibration on sound quality.
The power transformers, a source of vibration, have been
securely mounted on the highly rigid bottom chassis.
Direct mounting of cast-iron feet to the radiator in near proximity
to each other serves to suppress mutual vibration with the
power transformers and other sources of vibration.
• Compressed Audio Restorer
Denon’s new audio technology for MP3/WMA/AAC
compressed audio formats restores higher frequency sounds,
along with rich, deeper bass.
Connectivity & Future-ready Expandability
• Power amplifi er assign for zone 2
• Remote in/out
• 2way remote ready
(optional: DENON RC-7000CI/RC-7001RCI)
Ease-of-Use
• Audyssey Dynamic Volume, for real-time volume adjustment
Large changes in volume sometimes occur between docu-
mentaries where the sound is mainly narrative and movies
which often contain loud sound eff ects. Viewers often raise
the volume for documentaries to hear the narrative more easily
but then turn it down again when a commercial with loud
sound eff ects comes on. They do this numerous times during
a program of this type. Audyssey Dynamic Volume constantly
monitors the sound sources and adjusts the volume to the
optimum level for the particular source being heard without
sacrifi cing dynamic range.
The AVR-989 is also equipped with Audyssey MultEQ XT which
measures the acoustic characteristics of the room to obtain the
optimum acoustic eff ects, and Dynamic EQ which reproduces
the high and low range with the optimum acoustic eff ect during
low volume levels. Dynamic Volume combines these two func-
tions to achieve maximum performance.
• Audyssey MultEQ XT Auto setup and Room EQ
-Tower type microphone for more accurate measuring
-Up to eight measurement points
-ALFC (Adaptive Low Frequency Correction) fi lterning for
higher resolution processing in the low frequency range
• 2-line fl uorescent display on front panel
Current status, such as the input source or audio format, is
displayed in two lines. It is also possible to check the name of
the album or music track of the memory audio or other items
without viewing the TV screen.
The 2-line display also makes it possible to easily change
settings without the OSD (On-Screen Display) on TV monitor.
• Three Quick Select Buttons
• Auto setup, auto surround, auto signal detection
• Auto Surround Back Channels on for
auto-detection of supporting sources
• Auto Surround mode
• Audio Delay function (max. 6 frames or 200 msec)
• Night Mode for neighbor friendly listening
• Muting level settings (Full/-40dB/-20dB)
• Audio Level Memory, capable of correcting
diff erent signal levels for each input device
• Volume Level Limiter, for setting maximum volume levels
• Power-ON Volume Level Memory
• Variable subwoofer crossover switching