Chapter 2. installing and set up – HiTi P910L User Manual User Manual
Page 9
Chapter 2. Installing and Set Up
6
Parts Name and Function
(
Front View
)
(
Rear View
)
(Front Internal View)
(Upper Internal View)
№
Name
Function
Printer Status Lamps
Printer status display lamps are located
on the panel.
Drawer Unit
Open the drawer unit when replacing an
ink ribbon or paper, or when performing
maintenance.
Drawer Lever
When open the drawer unit, hold
this lever.
Power Switch
This switch turns on/off the power of the
printer. When the “|” marked side of the
switch is pressed, the power is turned on.
When the “○” marked side of the switch is
pressed, the power is turned off.
wait at least 3 seconds before
turning it on again.
Power Connector
To be used to connect the power cable.
②
③
①
⑨
⑧
⑦
⑤
⑥
④