Highgear VIA FM - Manual (Page 15)

english
13
In any PEDOMETER MODE:
1. PRESS the START key to acquire the
PULSE-READING MODE.
2. Place your index fi nger on the Pulse Rate
Sensor located top of the pedometer (Do
not press too hard). The Pulse Monitor will
begin to detect the pulse automatically.
NOTE: It may take few seconds to display
the current pulse rate (BPM= Beat per
minute).
USING THE PULSE RATE MONITOR
(PULSE ONLY)
BasicNB.indb Sec1:13 asicNB.indb Sec1:13 12/20/06 11:00:12 AM 12/20/06 11:00:12 AM