Highgear TechTrail 3 - Manual (Page 8)

1 sec Auto
1 sec Auto
start to flash. Press S2 to adjust and press S3 to select. After the
setting is complete, press S4 to fix it.
Chronograph Mode
The chronograph counts up in 1/100 sec resolution with working
range of 24 hours.
* Press S3 to “CH” chronograph mode.
* Press S2 for start/split operation. “SPL” will be shown when
split is selected.
* Press S4 to stop the running chronograph, or to reset the
stopped chronograph back to Zero.
Timer Mode
Timer mode presents the count down time at the upper row and
the current time at the lower row.
“CS” - Count Down Stop
“CR” - Count Down Repeat
“CU” - Count Down Up
Working range of the timer is 24 hours with the resolution of 1
second.
To Operate Timer Mode:
* Press S3 to Timer mode “TR”.
* Press S4 for 3 seconds to start setting timer time and timer
function, the digits start to flash.