DVDO iScan Pro Progressive Scan Display Interface - Manual (Page 11)

Silicon Image, Inc. iScan Pro User Manual
11
With YPbPr connections, the composite sync is always combined with the Y signal. The iScan Pro
will automatically do this whenever the color space switch is set to YPbPr. It is not required to
configure any of the internal jumpers for any YPbPr device.
Display Devices
Wire Color
RGB/HV RGB/S(comp) YPbPr Other
Red R (Red) R (Red) Pr Cr or R-y
Green G (Green) G (Green) Y Y
Blue B (Blue) B (Blue) Pb Cb or B-y
White (or
Gray) H (Horizontal) C-Sync no connect no connect
Yellow (or
Black) V (Vertical) no connect no connect no connect
Table 1: Wire Color Cross-Reference