Guntermann & Drunck NEO-FiberLink2 - Manual (Page 5)

Safety guidelines
NEO-FiberLink-2 · 2
Special advices for dealing with laser technology
The devices of the NEO-FiberLink series use components with laser technology
which comply with laser class 1.
They meet the requirements according to DIN EN 60825-1:2001-11, IEC 60825-1 as
well as U.S. CFR 1040.10 and 1040.11.
Mind the following advices when dealing with laser beams:
! Avoid eye contact with laser beam
Although class 1 laser are considered nonhazardous, direct eye contact should
be avoided. Do not stare into the beam or view directly with optical instruments.
! Always connect optical connections or cover them with protection caps
Optical connections of the Transmission socket as well as cable plugs must always
be covered with a connector or a protection cap.
! Only use G&D certified transmission modules
It is not allowed to use transmission modules that do not comply with laser
class 1 according to DIN EN 60825-1:2001-11. By applying such modules, the
compliance of the given instructions and recommendations for laser safety can-
not be guaranteed.
The guarantee of complying with all relevant instructions can only be given by
applying original components. The devices must therefore ony be operated
G&D certified transmission modules.
LASER CLASS 1
DIN EN 60825-1:2001-11
Complies with 21 CFR
1040.10 and 1040.11
Class 1 Laser Product