Replacing the battery pack, Datalogic skorpio™ models – Datalogic Scanning Skorpio-GUN User Manual
Page 79
MAINTENANCE
4
4.2 REPLACING THE BATTERY PACK
4.2.1
Datalogic Skorpio™ Models
To correctly replace the battery pack, proceed as follows.
1. Turn off the Datalogic Skorpio™.
2. Turn the battery lock screw to the open position (horizontal), then pull the lock
runner up, as indicated in the figure below.
3. Remove the battery pack.
Battery Contacts
59
This manual is related to the following products: