Datexx RC224W - Manual

DATEXX RC224W MANUAL (English)
SIZE: W65 X H105 (mm)
BY EMILY TSOI 30/12/05
3 4
2
(DRC-605)
USER'S MANUAL
FRONT VIEW
A. RADIO CONTOLLED CLOCK WITH INDOOR
TEMPERATURE AND MOON PHASE IN
A TWO - LINE LCD DISPLAY
Radio Controlled
Digital Alarm Clock
with Thermometer
and Moon Phase
Time of Day with
Seconds, US Time
Zone Map
Indoor Temperature
and Alarms
Moon Phase Indicator
Calendar Day of the week
SIZE AAA/UM4
SIZE AAA/UM4
G
C E D B
F
2 SET 1 SET
Z Z
1
2
M D
PM
GETTING STARTED
BATTERY INSTALLATION
* Open the battery compartment door.
* Install 2 batteries AA size 1.5V matching the polarity
as shown in the battery compartment.
* Replace the battery compartment door.
RADIO CONTROLLED CLOCK
After installing batteries, set the time manually.
ONE TIME SET is needed ONLY when first used.
The clock will update the time automatically afterwards.
Once the atomic time signal is received, the date and time
will be set automatically, and the [ ] icon will appear.
After the clock is set manually, place it by the window for
the better reception. The atomic clock receiver is
programmed that it will continue to search for the atomic
time signal daily for every hour between 1:00 am and
4:30 am. Once the time signal has been successfully
received, the time and date will be updated automatically.
CALENDAR AND CLOCK DISPLAY MODES
Precise time is displayed in hour-
minutes-seconds format in the middle
line of the Atomic Alarm Clock.
The date is displayed in month-date
format on the top line next to the day
of the week.
MANUAL SETTINGS
TIME ZONE
* Select the Time Zone by pressing and
holding the UP ( ) button for 3 seconds.
* Keep holding UP ( ) button until the
desired time zone (Pacific, Mountain,
Central or Eastern) is highlighted on
the clock’s display map.
CLOCK
* Press and hold MODE button for 3
seconds: the year digit will flash.
* Press UP ( ) or DOWN ( ) to
change flashing digits.
* After the first value is set, press
MODE button again to confirm and
move to the next parameter.
* Continue setting month, date, hour,
minutes and temperature display
format.
* Press MODE button for the last
time to return to the time of day
with seconds, after the last
parameter is set. PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
PM
D M
1
2
YR
To Select Time Zone
Hold Down the " + " key till the time zone lands on
your area then let go.
To Set Time for the first time
Hold Down to "MODE" key and adjust to desired
Year, Month, Day,Hour, Min by pressing "+" or "-" keys.
QUICK START