Grandstream GXP2200EXT Quick Installation Guide - Manual (Page 4)

3 4
Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
1. Ensure the GXP2200 is properly powered up and connected to the Internet;
2. Type the phone’s IP address in your PC’s browser;
3. The default username and password for administrator is “admin” and “admin”.
The default username and password for user is “user” and “123”;
4. Login to GXP2200’s web GUI and configure Multiple Purpose Keys for Exten-
sion board 1/2/3/4 under web GUI->Advanced Settings->MPK EXT Settings;
5. On the GXP2200 extension board, press Left or Right button to browse all the
MPKs’ status in different pages;
6. For more information, please refer to the GXP2200 Extension Module user
manual.
CONFIGURING GXP2200 EXTENSION MODULE:
After the GXP2200EXT is successfully booted up and connected to the GXP2200,
the GXP2200EXT can be configured via the host GXP2200’s web GUI.
2. After successfully booting up, the extension board will stay in idle. Press and
hold the Left key for 3 seconds to check the version information and status.
Press any key to return to normal display;
3. Press Left or Right key to switch between two pages if there are multi-purpose
keys configured in both pages;
4. Press the multi-purpose key to perform the assigned function.
3. Connect the extension board to GXP2200 via the EXT port using the RJ11-
RJ11 cable provided;
4. Install the phone stand on GXP2200 and extension board.
2. Apply the screws provided and securely tighten them in;
Multi-Purpose Keys
Left Key Right Key
Slots for the
GXP2200 phone
stand
Slots for the
GXP2200EXT
stand
Push the stand
upwards
Push the stand
upwards
Remove the rubber covers here
on the back of the GXP2200EXT
and the GXP2200. You will see
the slots for the connector plate
EXT Port to GXP2200 or
uplink GXP2200EXT
EXT Port to another
GXP2200EXT
EXT Port to GXP2200EXT
TIPS FOR USING THE GXP2200EXT:
1. Power up the GXP2200. The GXP2200 extension board will show the booting
up screen with version information and connecting status;